Generate A Set Of Through Or Pocket Holes For MFT Style Top)

Diameter of hole in inches (20mm = .7874 for reference):

Bit diameter in inches:

Number of horizonal holes to create:

Number of vertical holes to create:

Spacing on center of horizontal holes in inches:

Spacing on center of vertical holes in inches:

Create online cut spirals for pockets, or to hog out all inner material, when selected. Will also create a rough pass and a cleanup pass
Cut overlap in inches for online cut spirals:

Create on-line rough cut and cleanup pass. Only looked at if not creating a spiral cut
Rough cut offset in inches (before final cleanup pass. Only used for online or spiral options):

SVG left edge distance from nearest center of outside holes in inches:

SVG right edge distance from nearest center of outside hole in inches:

SVG top edge distance from nearest center of outside hole in inches:

SVG bottom edge distance from nearest center of outside hole in inches:

Use the centers of the outside holes for border offsets instead of the edges of the holes.
Add a black rectangular background for the holes.
Add a white circle behind each spiral (Can be turned off if you're going to use spirals and/or online cuts.)
Add blue reference cross at the center of each circle
Treat ALL values as millimeters. (Dont forget to change rough/overlap to .254. And change the bit diameter to mm.)